POLAROID FLA-2007B
Owner's Manual

INSTALLATION
1. Remove the LCD TV from the box and place it on a flat surface in a well-ventilated location. 2. Connect the output terminal of RF cable to the corresponding TV RF signal input terminal. The LCD TV is a high technology digital product, use quality RF cables to obtain optimal results. 3. Connect the output terminal of the AV devices such as DVD player, VCR, etc. to the corresponding terminal of your LCD TV. 4. Connect one end of the D-sub terminal to the corresponding terminal of the host computer, and connect the other end to the corresponding LCD TV terminal. Screw down the screws on both sides to secure it. Caution: When connecting, plug directly and lightly to the interface, otherwise you may damage the pins in the connector. 5. Ensure that every AV signal cord is correctly connected to the corresponding jack. 6. Put the DC power plug in the DC input outlet of the TV, then plug the AC power plug of the power adapter in the AC power outlet.

GENERAL OPERATION
To Turn the TV On After the power cord is plugged into the power socket, the TV will enter Standby mode. Press on the remote control or the front panel to turn the TV on To Turn the TV Off 1. Press on the remote control or the front panel to turn the TV off. 2. Unplug the DC power adapter from the AC wall outlet and then unplug the power adapter from the TV to turn the set off completely. Caution: The TV will be shut off automatically when AC power is interrupted. Unplug the power adapter from the AC outlet if this happens. The last used TV mode will appear when power resumes. Do not turn the TV on/off too often. Unplug the power adapter from the AC outlet if power is suddenly interrupted.

9