The users guide was excellent. It provided the information neeeded to connect and control the Crate system. Nothing was left to chance
Text excerpt from page 5 (click to view)
English
4 Attaching the holder to the camera Before use, open the roller cover and inspect the processing rollers. Clean them if necessary (see section 16 Cleaning the rollers). Slide the holder into the back of the camera, just as you would a standard film holder. If your camera has slide locks, use them in addition to the spring back; the locks fit into slots on the sides of the film holder. Determining the processing time The processing time for any exposure is dependent on the film type. Each Polaroid film type has a two digit timer code which can be found on the film packaging, on the film holder or in the table on the previous page. This timer code has to be entered manually into the timer: Press the mode button until the film timer code icon is displayed.
5
c
Pushing the scroll button again will rotate the numbers from 0 to 9.
d
5
e
When you have reached the desired number press the mode button and the right digit will flash. Repeat step c. Once the correct film timer code is displayed, press the mode button to save the selection. Displaying the ambient temperature Press the mode button until the temperature icon is displayed.
6 a
a
b
Pressing the scroll button changes the display from °C to °F.
b
Pressing the scroll button will cause the left digit to flash.
